Recent content by Jorgenson

I remember that another mechanic once removed or replaced the diff. Possibly distance discs were left afterwards

Great drawing, thank you! As far as I know, there are small arrows or markings on the two drive shaft components. in our p6b with lt 77 a shaft from an automatic has been installed. That's a good thing. The markings also point to each other :) . I modified the mount. i can now adjust the...

we have a p6 3500 s that got an lt77. the car has vibrations, from 130 km/h. of course we have already fixed the usual factors: wheels, drive shafts, cardan shaft. my question is: can the installation angle (the bracket from the lt77 is self-made) be the cause?

good tip with the wheels! thx the car has vredestein sport trac 195 /70 14 , I make very little pressure (1.8 ) on the tires and drive. I don't have a good experience with rubber from wadhams, but he has probably no fault. the rubber bag for the gearstick was torn after a few weeks, the rubber...

a year ago we installed on front axle & rear axle the superflex.co.uk blue. the customer says it rumbles and i can confirm that. which rubbers are nice soft? the orgiginals from wadhams?

yes, the transmission tunnel is different. we know that but I do not care. i converted my mk1 to r380. I get along well with both versions btw: i still have a bw35 and a bw65 for sale ;-) thx

no, way too far away and too many bucks for transport

no I can not use, but thanks for the bad offer ;-)

oha...bad news

I am looking for a baseunit for restoration. can still roll, but does not have to.... I can't find anything on the continent

I'm looking for 4 good wings in burnt gray with original paint. the paint may be matt , but they should be so that the paint is worth preserving best regards jorgen

a wrong coil was installed ! wish a happy easter regards jorgen

the quality sucks today but i had the same problem with a sd1 distributor, so i look at the data of the coil again

It can't be a capacitor .. because I've just installed a new one from jrw

i still have a ballast resistor from mallory on the shelf. should we do this in between