Search results

Was it lukewilliam? Downside is you have to travel to Perth to pick it up, http://www.thewestclassifieds.com.au/listing/125916/ Appeared in west Australian newspaper last Saturday, but not on Perth gumtree, yet!

http://www.gumtree.com.au/s-ad/byford/c ... 1077434821 And http://www.gumtree.com.au/s-ad/binningu ... 1076674928 If only I had time money and space

Is someone able to provide the measument for the sleeve shank diameter for the wheelnuts which suit the rover alloy wheels, I see that Wins do a set of wheel nuts to suit alloys fitment to P6 (7/16" thread), but was wanting to know what the shank diameter is (and shank length as well if whoever...

Hi all, can anyone advise if the harmonic balancer's (vibration damper) on Rimmer Bros website suit the early 3.5 motor? thanks Scott ERR3422P ? (aftermarket) http://www.rimmerbros.co.uk/Item--i-ERR3442P or, ERR3442P1 ? (OEM) http://www.rimmerbros.co.uk/Item--i-ERR3442P1

Has there been any availability of these rubber elbows (new) of late?? Last forum comment on this subject I can see was pilkie from 2012; "They are currently not available either nos or repro,but I did see a post about the possibility of ianp6man looking into the remanufacture of them" I see...

a few P6B's for sale here in West Oz, now if my numbers come up in tonights $30 mil lotto draw!!!!!!! http://www.gumtree.com.au/s-ad/bayswate ... 1047556025 http://www.gumtree.com.au/s-ad/bullsbro ... 1047452354 and a two for the price of one deal, http://www.gumtree.com.au/s-ad/mount-he ...

unless you have seen this before, it got a mention in "The BMC Experience" a magazine published here in Oz. FYi www.bmcexperience.com.au they say it was a film "produced specifically to show to workers to try and shock or embarrass them into making better cars" (24mins) and we get to play...

A nice one pops up now and again here in West Australia, looks very original, worth emigrating???!!! http://www.gumtree.com.au/s-ad/pearsall ... 1028806963

Hi all, I know there is a crank oil thrower on my rope seal engine, but was looking through my engine bits from my dismantled 76' engine with front and rear oil seals, and could not find it, I can't remember if there was one on it when I took it apart as it was quite a while ago now, but as I am...

After my impulse ebay purchase of a Nardi steering wheel over a year ago it is finally fitted after I had a spacer/adapter made to suit. My Italian neigbours will be impressed!!! The wheel had a shallower dish than the standard so a 25mm thich spacer maintained the arm reach and also the reach...

I came across this USA company while googleing timing covers, and their catalouge makes for some interesting solutions to low oil pressure issues as the Buick V6 engines have similar issues with the RV8 engine seeing as they share common timing covers/oil pump set ups. pg 76 in their catalouge...

saw these two on aussie autotrader http://www.autotrader.com.au/cars-for-s ... to+results and http://www.autotrader.com.au/cars-for-s ... to+results

I've not long sent off the block to the engine reconditioner (reputable of course) to make a start on my engine rebuild. I'm using the engine out of my spares car as it has the oil seals fitted being a '76 car, and will install it in my '74 when ready. I hope to build a strong reliable road...

this 1971 3500 on aussie ebay... http://www.ebay.com.au/itm/Rover-3500-1971-4D-Sedan-3-SP-Automatic-Unregistered-Sept-2011-/130599605010?pt=AU_Cars&hash=item1e6857d312

just refurbished the rear calipers off my spares car with seals and 'o'rings but are the dust cover rubber seals available seperatly from someone? as I sourced the piston seals "o"rings etc individually rather than obtaining a seal kit. at the moment i am experimenting with rubber section...

I'm soon to fit an auto transmission oil cooler to my P6B and was wondering if anyone can enlighten me which pipe is the flow (pressure side) into the radiator (at the radiator) the top one or the lower one, Regards, Scott

would anyone in Oz or NZ have a part No. (PBR part No. if possible) for a seal kit for the lockheed slave cylinder on the servo (booster), I've tried the pbr website search with no luck and the bake parts vendor i usually use has no listing either, thanks in advance, Scott

saw this '72 3500 on the triumphroverspares website, nice colour (anyone know what its called?), nice interior and air con unit, shame it's being dismantled http://www.triumphroverspares.com.au/page.asp?parentid=5&parent2id=17&productid=1026#viewimage Regards, Scott

the gear knob selecter on my V8 auto is coming adrift, it seems to be kept on by some sort of mastic which is softening up. having taken off the one on the parts car it also had similar problem. Is there supposed to be a threaded insert which screws it in to the (1/2"UNF thread) lever as my ones...

I was looking through a hard copy of something I had printed off a webpage, some chap rebuilding his SD1 3500 V8, I forget now the website from where I got it as I've had it for a while, but anyway, he goes on to explain the extra holes he had drilled towards the front of the valley through into...

While reading through an old Car Mechanics (UK) magazine (Jan 1980) which I've had since, well, January 1980, which has a P6 on the front cover (do I need any other reason to purchase?) It has an article on "Strip and build Rover's V8" and in it it mentions, quote; "You must also use a special...

I have just purchased a parts/doner P6B and the Australian compliance plate states 2/76 and there is a number plate below the vin No, which reads HP 1883.12.75, Am I right then in thinking that the latter is the UK build date indicating 12th month of 1975 (don't know what the HP 1883 means) and...

What are the best fitment option as far as V8 head gaskets go? I've seen a lot mentioned about the composite gaskets being better for sealing over the standard (tin) gaskets (as well as being a bit thicker) and I was enquiring with a company (here in OZ) who do a VRS Gasket Kit and say's that...

Having just overhauled the fuel pump, I noticed through the front cover that my timing chain was quite loose with not a lot of tension in it. i am thinking this need looking at pretty soon as (not having a workshop manuel yet) I don't think there are any tensioners on this chain? so this would...

Why such a long hose to supply the fluid to the power steering pump, it runs across the bulkhead down the drivers side (RHD) then across in front of the radiator then sharply bends (with a kink I noticed on my hose) up to the pump. I intend to make a shorter route using similar id tube (either...