Search results

Brief mention about halfway through the article alongside a few other classic British bruisers 8) http://www.speedhunters.com/2015/07/festival-of-speed-they-know-what-theyre-doing/

Does anyone know what the load is to pull the steering arm on the hydraulic idler? The steering on my P6 is very heavy, and once the idler was removed it felt normal. On the bench it felt ok, some resistance but I don't have any reference to what load is required to move it round? Draining...

Does anyone have a spare 4 cylinder manual pedal box available?

I'm after a pair of 2000 lower suspension arms for the rear to have re-furbished, so bush condition isn't a great concern, preferably not in excessively rusted condition. Anyone have a spare set?

I've just bought an SD1 for a quick project :lol: , just wondered if there's enough love for them here to put a thread up, or if they're still hated as not a real Rover then I won't so as not to offend? :D

Has anyone got a spare complete heater unit, with working fan and water-tight matrix? I need a heater box to rebuild, so not bothered if the bottom has rotted out, but would be handy if the locating brackets are still present for alignment.

This is a spare set of parts I've got to convert a fwd Rover M16/T16 petrol or Perkins Prima/L-series diesel to the LT77 rwd gearbox. What I have is the bellhousing, engine backplate, flywheel, 9.5" clutch and starter from a Perkins Prima powered LDV van. The flywheel does not have a...

I may have a 2000sc engine and autobox going spare in the new year, is there any demand for them or should it just get weighed in? It moved backwards and forwards under it's own power, and was driven into the garage about a year ago, so should just need a battery and fresh petrol to start and...

I have a spare rear diff from a V8 for sale, slight play on input shaft, oil was drained a few years back so it could be stored in the garage and not drain out through the breather. No brake calipers fitted, and I've not had it on the road as I broke the P6 for spares. £50 collected near...

I found this browsing the internet, a 2000TC track/pace car in America. Here are some links: http://www.race-cars.com/carsales/other/1318526607/1318526607ss.htm http://www.race-cars.com/carsales/other/1318526607/1318526607pp.htm

This morning I fitted my video camera underneath the back of my P6 pointed at the de dion tube and went or a short drive to see whats going on down there. http://www.youtube.com/watch?v=Axrmf7InblY

Hi, has anyone got a spare working fuel tank sender I could have? Simon

I have for sale a 2000sc engine and autobox that is currently fitted in a '71 p6. It hasn't been run in a while so I don't know what it's worth, maybe £100 the lot? I plan on trying some fresh fuel and a battery in the morning and see how well it runs and get a couple of pics. I also have a...

I've got the dark wood style trim inside my p6, would I be right in thinking it's mahogony? I'm sure I've read somewhere that's it just wasn't sure :)

... I found a brown series 2 v8, mostly stripped, but still appears to have the complete power steering set-up fitted. I don't know if it's worth anything but thought it might be worth a mention: And, correct me if I'm wrong, but don't landcrabs also come with 5x5" pcd, and I don't know if...

This isn't exactly p6 engine specific so I thought I would put it in the Lounge :) I'm about to get some electric radiator fans for my project p6 and my land rover. Measuring up the standard 2000 radiator I currently have fitted to my p6, I believe I could fit two 10" electric fans diagonally...

Has anyone got one spare rover v8 twin SU air filter adapter to match this one I have? Also, has anyone got a spare pair of elbows for the twin SU setup? It doesn't matter if they're the short or long type, as long as they're in useable condition :)

Recently, I've noticed a few mentions in this section (P6 Suspension/Steering) of upgraded front suspension components. Previously I was not aware of any factory or in service upgrades to the front suspension structure and base unit other than the two brackets that weld on either side of the...

Hope you like :)

... or two please :wink: Bushes aren't essential, but it'd be nice if they still have useable top hat bushes with them. Simon

Has anyone got a spare pair of the hinge halfs that attach to the door? My front passenger door needs a new pair because the bushes have worn. Simon

I've got some old stuff that I'll never use lying around that may be of use to someone on here. All free to collect, or the cost of p&p. Right, here goes: 2000 manual 4 speed box, I think just missing the bellhousing and selector extension on the top. All looks clean inside, untested...

Here is my 2000tc project that I've been working on for a few years now. I found it locally in a barn where it had sat since 1980, which has kept the shell in excellent condition. This has now become the basis of what will probably become a track day or 1/4 mile weekend toy. So far...

Does anyone have a spare set of front Wingard seat belts like these: I already have a spare set of stalks but really want a pair of reels. Simon