Search results

  1. corazon

    Tie rod hit the inner wheel housing

    I’m not sure that’s a shim. On my shell there was quite a variance in the stick out of the drilled mounting bosses, presumably just how the factory suspension jig is set up in relation to the bulkhead square etc. Jim
  2. corazon

    Jag 3.54 Diff

  3. corazon

    Offenhauser Valve Covers 5189

  4. corazon

    Spotted at Santa Pod

    Saw this lovely P3? hotrod at Santa Pod yesterday, not Rover powered.. Jim
  5. corazon

    Restored 2 Door RR Classic Rolling Chassis

    I wouldn’t usually post a RR on here but there’s definitely some overlap with custodians so thought why not. Soon to be up for salea fully restored 1980 2 door Range Rover Classic rolling chassis with logbook. Poker straight and solid chassis, media blasted, zinc primed and tough satin black...
  6. corazon

    Block hugger headers Rv8

    I’ve got stainless header flanges for sale if you want to make some/get some made. Sold my block huggers a couple of years ago
  7. corazon

    Nodiz Pro 3D ignition ecu + coilpacks etc

    Brand new in the box Nodiz Pro 3D ignition management ECU. This is the 8 cylinder version. Wiring harness with plugs to suit Ford Motorcraft coil packs. I had planned to trigger this from the factory bell housing sensor on the 4.6. But can be triggered from an additional ring mounted to crank...
  8. corazon

    Mocal Remote Oil Filter V8 setup

    Tuesday/Thursday ahem :D
  9. corazon

    Mocal Remote Oil Filter V8 setup

    Hi Jase, sure I’ll pop some photos up on Tuesday Jim
  10. corazon

    ARP 3.9-4.6 10 bolt head studs

    Yes full engine set indeed Mark
  11. corazon

    B&M Quicksilver Ratchet Shifter

    Brand New in B&M Quicksilver ratchet shifter, console version. Suitable for 3 and 4 speed automatic transmissions. Only been taken out if the box for mock-up purposes Also comewith a used Hurst shift cable. £300 Located in Small Dole, West Sussex and can post at cost Jim
  12. corazon

    ARP 3.9-4.6 10 bolt head studs

    Brand new in the box, ARP 157-4301 ARP Studs for 10 bolt V8 heads Prices seem to vary from £230-300 from current sellers. I’ll take £160 Located in Small Dole, West Sussex and can post at cost Jim
  13. corazon

    Harland Sharp Roller Rockers

  14. corazon

    Bronze bushed rocker shafts

    Roller rockers are already bronze bushed
  15. corazon

    Mocal Remote Oil Filter V8 setup

    Remote oil filter setup for the V8 by Mocal. Perfect for 4.6 conversion if retaining its front cover £80 Located in Small Dole, West Sussex Can post at cost Jim
  16. corazon

    Stainless V8 Manifold/Header Flanges

    Brand new pair bought from Wheng Parts for £100. The best stainless flange available for making your own Rover V8 headers. Rover V8 Flanges £70 Located in Small Dole, West Sussex Jim
  17. corazon

    Edelbrock 500 and Performer Manifold

    Edelbrock 500 carb and Performer Manifold. Far superior manifold design to the standard SU one. Perfect setup for a 4.6 engine. Both the above with bonus fabricated kickdown linkage (made in the US by somebody, came with the set when I acquired it, looks very functional. Also includes Edelbrock...
  18. corazon

    Jag 3.54 Diff

    Jaguar 4ha 3.54 ratio differential £120 I have calipers and handbrake calipers to go with it for the right price Located in Small Dole, West Sussex Jim
  19. corazon

    Rebuilt Hybrid ZF 24/22 auto box

    I believe that is Andy on eBay, I remember him being in Wales, the finished boxes look exactly like mine did before I put it in storage. Expect a little less sparkle, but still as clean. AFAIK Nobody does an adapter mount kit for P6 yet though? Or does he now? Jim
  20. corazon

    4.6 Cylinder Heads

    The best factory heads for the Rover V8. Complete with valves and springs etc but I’d planned to machine and replace with larger valves and use roller rockers on new shafts. From memory I cleaned up the valve throat castings, just smoothing, no major material removal. So they should perform...
  21. corazon

    4.6 Block + Crankshaft & pistons

    Good condition stripped 4.6 block, from a 94 Gems P38 from memory. Bores all look good but I’d planned to fit top hat liners as a matter of course. Crank looked fine on disassembly, all pistons and rods were good except one which slipped through my fingers and dropped on the concrete floor...
  22. corazon

    Harland Sharp Roller Rockers

    Rare BNIB Harland Sharp Roller Rockers for Rover V8. I ordered these direct from the US company a few years ago for my 4.6 build. Due to change of direction with drivetrain these are no longer required. These are now retailing at £470 on Summit Racing, perhaps a bit cheaper direct from...
  23. corazon

    Offenhauser Valve Covers 5189

    Brand new pair of these in the box, arguably the finest looking covers for the Rover V8. Difficult to get hold of currently by the looks of it, and prices have gone up to $720 (£580) on Summit Racing and others. So looking at £700 to get a pair landed in the UK and no stock available till June...
  24. corazon

    Rebuilt Hybrid ZF 24/22 auto box

    Ah, maybe I should adjust up a little then, don’t want to be undercutting his business too badly. Saying that, I have stored it for a few years and I’d prefer a quick sale to help somebody out who maybe couldn’t afford the conversion otherwise.. As long as I can offset the PDK box I bought...
Back
Top