For those who have already gone down this road, looking at you Cobraboy. What is the considered way to re-attach the slam panel?
Just wondering what others have done. As you can see I've removed the spot welds. They are positioned so organically, in an artisan way.
I'm not going to use Rivnuts...
1.
I've just booked an MOT for my modern car. The earliest free date is 14 September 2023, a 4 month wait.
I live in Northern Ireland and our MOT centres are run by the NI Department for Infrastructure, which is a devolved department. I'm waiting for our devolved Goverment members to go back to...
Some historic helicopter film of a Coldhaven P6 police car. :) Later on it changes to a german car.:eek:
Go on, watch the youtube clip from the start. :D
I've entered the Rover in an Autotest. This is a forwards only multi venue autotest, so it's not that mad.:rolleyes:
The other entries in the Classic car class are either Minis or Midgets. I hope they like the sound of a V8. Entry List
When out 'testing' I found the clutch is not up to the...
It's that difficult time of the year, for me my birthday and the season for Celebration of Consumerism are close enough that I run out of answers to "What do you want?"
So, what do you recommend as an answer to that question?
To start it off, if you have heard of Adrian Newey and have any...
Good to know that the some of the best minds are getting caught out switching to higher ethanol petrol e10. How are we to cope!! :confused:
www.newsdirectory3.com/red-bull-f1-engine-problem-is-related-to-switching-to-e10-fuel
I've been watching this guy for a while. I find him truly inspiring, for all use wannabe garage engineers.
This video is about the replica 1919 engine, he made from a black and white photo. A true craftsman.
His other videos are just as good. Enjoy.
Solex Bicycle (1968) - British Pathe
A 1968 film about Solex, my partner tells me they ride past a few Rovers.... I've watched it a few times now and think I've counted 2; I'll watch it again and see if I spot more.
Northern Ireland Minister for Infrastructure has announced that changes to legislation to exempt private vehicles of historic interest from annual MOT testing, come into effect from today 12 October.
Mallon announces new legislation to exempt vehicles of historic interest from MOT testing
The...
Fyi
Just appeared on Done Deal; Rover V8 Engines for sale in Wicklow for €250 on DoneDeal
Includes :
4 rover V8 engines
1 bare block
1 3.5 Range Rover injection engine
1 P5b 3.5
1 3.5 Manual engine of unknown origin
All require rebuild
Having left the Rover V8 for a couple of months, on engine start the oil pressure warning light went out but the gauge was not budging. Later once hot and with higher revs the gauge flicked into life.
The engine rested over night and the gauge was stuck again at zero, then ping it flicked into...
Our car came with a tow bar and it was the first thing we removed all those years ago. I need to transport my VeloSolex tomorrow so spent the day making a bike rack to attach to the tow bar mount.
Here is the result.
The Solex is 9 years older than the car, so it is all fairly period. I like the...
I've started overhauling a very worn engine and thought some of you may enjoy the process. I'll show the old tired stuff, but the focus will be on the new and improved.
Here goes:
The old cam is on the right,
The old cams standard lift of 6.6mm has worn down to 3.8mm on two lobes, only one...
We're building a new V8 engine the P6 to swap for the very good standard existing engine. As the existing engine is good, I do not want to leave it open to the atmosphere by breaking seals; therefore we require a P6 sump and oil pickup and anything I don't realise I need to convert below the...
I'm looking to buy a car cover for storing the car outside for the winter. Does anyone have any recommendations or otherwise for all the different companies selling these products?
I'm looking at:
Stormshield +
Moltex Outdoor Car Covers All Weather
Cover Your Car - Tailored and Fitted Car...
Has anyone written a guide or HowTo on rust proofing the P6s?
I was looking at a rust proofing site and they have a very informative diagram of the procedure of application for a Jag
Has anyone done or seen similar for the P6?
Or I'm starting this thread on how we should rust proof a P6...
Question: What is the hole below the two forward wing mounts for?
At the moment I'm thinking it is or us all to buy sill repair panels as the cavity behind the hole goes down to the sills.
To save a thousand words - here's a picture:
Either I weld a plate over the hole or find a grommet...
Hi all,
Our car has just failed the MOT, if you've follow the thread on the car, you'll know why I think this failure has an easy fix. Just a matter of welding the area around the lower D piller. (and a new brake switch as well)
Do anyone know where we can obtain the steel rubber gripper...
Hi all,
2nd problem found on a fast test drive. I'm getting a knocking from the front right corner. We have always had a knocking from the front right but we could never find the problem.
Tonight with the car gripping better than ever the knocking is worse. However I think I've found the...
Hi all,
Taking the car for a fast test drive I've found fast cornering with power on is sometimes causing, what I think is, the prop-shaft UJ to hit something. (I can hear the noise)
Our car has an SD1 gearbox fitted, here is a picture of what I think is the offending UJ.
I remember tightening...
With christmas money I like to splash out on something I'd not normally buy. So I bought a laser level.
I''ve just put the Rover up on axle stands and used the laser to level the car flat as per the Haynes. The laser level is used to provide a datum to measure from or to. Easy to provide a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.