Hi Harvey,
The cover plate that I am talking about is the one at the front of the gearbox that carries the torque converter shaft and bolts into the front of the gearbox holding it all in place the Atf is pouring out of the bottom of the bell housing could this be anything else?
Cheers
Stephen
Hi all where is the best place to purchase a front be35 to torque converter atf seal for a p6 2000 sc and does anyone know the best way to replace the seal as I cannot use my car because of so much atf loss through the bell housing and I have already put a new seal around the cover plate. Also...
Thought I needed to post my thanks to Harvey for all of his help over the past 3 years when I have been trying to save my rover p6 2000 auto. Your advice and help has been great fully received and my car is now on the road as my daily driver. The BW35 gearbox is working as it should and I could...
Hi Andy, welcome to the forum. Cxc plates from 1972 were sometimes from press cars. Nick dunning is the man to know. If we can help please let us know as we are a friendly bunch.
Welcome
Stephen
Hi Harvey thank you for the quick reply. I have replaced the filter and the whine seems to be coming from the front where the torque converter is when the bonnet is open. The rear clutch i will know more on Sunday when I am off duty. The front baring that fails what's in the plate that the...
Hi Harvey I have rebuilt the BW35 gearbox after failure of the front bearing. The box has been running quite well but I have been getting a whine from the torque converter when stopped good gear change up and down and strong reverse. Today whilst on my way to work I lost top gear and reverse...
Hi Chris,
I will take the box and rebuild it when I get chance if it is still avalible then you could have it back if you need it or I will offer it to the members.
Stephen
Hi Brian, welcome to the forum. Where are you based in the country. The reason that I ask is that we have members of the forum all over the country and we are a sociable lot as you may have noticed. We may have someone close by who may be able to pop round and assist you. Have you joined one of...
Hi.Peter, I do have a pair of front light units one is good and the other is just ok where are you in South manchester I was thinking about £15 for the pair. If you would like them please call me. Syephen
Hi, I have a pair of side lamp units available. I will look them out in the morning and check their condition. I a based in Wythenshawe. If you need to contact me my number is 07988112883.
Hi I have an ac11 alternator where are you based in the country. And could I have your email address to email pictures of the part or mobile number so I could text a photo to confirm. If you still need it that is. Thank you Stephen or you could call me on 07988112883
Hi do you still have the TC engine available if so what price would you be looking for if I removed the engine. Also when would you be available for me to come and remove the engine. Thank you
Stephen
I have had a similar problem in the past which turned out to be the fuel filter ( in line ). A nice economical remedy if it turns out to be the filter good luck. Stephen
Hi Jamie, which type of seatbelt is it is it the type with the Rover emblem on it or is it an after market type. Could you post a photo of which type you need as I have a few in manchester. Best wishes. stephen
Hi James the dipsticks have to go through a bend on the way into the gearbox so you may find it useful to turn the dipstick on the way in there should be no need to force it. Also check for sharp edges on the end of the dipstick as this will catch on the metal tube on the way in. Stephen
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.