Search results

Has anyone used techauto (TA classics)? I’m in need of carpets for my P6 Thanks,John

Are there any options for adapting a 5 speed gearbox to a 4cyl engine? Cheers,John

Hi I’m in search of a gas pedal assy for a Lhd TC,anyone in North America have a spare they are willing to sell? Cheers,John Walkden

I’m looking at pulling the 4 cyl out of my 72 TC2000 and putting a Rover V8 in. Has anyone done this? Any tips or tricks involved,I’ll use a LT77 out of a TR 8 Any help appreciated Cheers,John

Im going to re&re my heater box this winter and I can’t seem to find replacement seals,does anyone make them? I would also like to upgrade the heater fan,I see a Metro fan is an option but living in Canada that won’t work as they weren’t sold here,any other options? Cheers,John

As shipping from the UK to Canada pretty much doubles the price of new shocks,does anyone have the extended and compressed measurements for rear shocks? I’d like to find a cheaper alternative locally if possible Cheers,John

Hi I considering converting my HS8 setup to Hif6’s anyone have a set including the throttle cable and mountings they are willing to sell? Cheers,John

Just wondering,has anyone put a Toyota 22R and 5speed box in a 4cyl P6? being on the west coast of Canada P6 parts are somewhat hard to come by as are mechanics who are familiar with Rover’s eccentricities. The 22r is a great little engine and parts are really plentiful and cheap and it’s got a...

Just wondering if anyone has done a Weber downdraft conversion using a single carb head? Cheers,John

Hey folks I‘m looking for an iron on Rover patch/crest for my jacket,anyone know where I might get one? Cheers,John

4 Cosmics I just removed from my 72 P6 Excellent condition,powder coated Centre caps included $450 obo I am In Vancouver,BC

Hey Folks I’ve had a V8 hood in my storage for ages and I’m thinking of putting it on my 72TC Is It a simple bolt on or did the base unit measurements change from Series 1 to 2? I’m also thinking of painting it satin black as well,are there any others who did the same and are there any pics...

It looks like I have to rebuild or replace my brake master of my ‘72 2000 TC I found this master in my box of goodies,can anyone identify it?is it Rover? Cheers,John

I replaced the front springs on my P6 and now my camber issue has cleared up,the old ones were 16” long when they were out,so quite a bit shorter than new. I need to replace the rears as they have sagged quite a lot I might have a line on some here in Vancouver but in case I don’t I might have...

I have posted on here regarding my -camber issue but still haven’t managed to figure it out,until now,maybe, it seems the driver side spring has a pronounced curve whereas the passenger side is quite straight. Does anyone know what would cause the difference? collapsed spring? spring not seated...

Hi I replaced my clutch on my P6 but it appears that there are 2 diff covers,one is just the “fingers” the other has a circular plate where the release bearing contacts. The one I removed has the circular plate and I replaced it with the other style,but now I can’t get the clutch to...

Has anyone mounted a remote bleed nipple to the base unit to avoid the usual pain in the neck rear bleed nipple on the caliper? Cheers,John

Good Morning I'm pulling the engine and gearbox and while it’s out I’m going to clean everything up,what colour should the engine block be? Cheers,John

Has anyone ever found an alternative gearbox option for the 4cyl cars? Mine will need a rebuild and I’m just wondering if a swap might be a less expensive option as there aren’t a lot of P6’s in BC and shipping costs really start to add up Cheers,John

I recently replaced the upper and lower ball joints on my 72 P6 I took the car on a 1000 mile trip last month,I am planning on another trip so I pulled the wheels to have a look and I noticed that both front wheels had inner wear down to the steel belts. Does replacing the ball joints affect the...

Out with the old and in with the new! Not a bad job really,just make sure you label the wires correctly,also working of my scissor lift I didn't have to be on my knees and twisting my back. Next job,relays for the headlights,and ball joints Cheers,John

Hi I am looking for the,"The rod-to-cable 'see-saw' throttle adapter from the 2200 TC setup. I am swapping out my HS8 for Hif6 but being in BC Canada they aren't available over here. Can anyone help? Cheers,John

I am looking for the later style cam cover which has Rover on it would anyone have one for a reasonable price? I am in Canada so the shipping cost might be an issue Cheers,John

Hi All I'm John Walkden from Langley,BC Canada. I have a1972 P6 that was originally from Hong Kong. I purchased the car in 1999 an restored it 4 months later. I finally got fed up with driving a right hand drive car here in BC,so I converted it to LHD in 2008,now my wife doesn''t scream every...