Thanks, I bought seals 19 month ago that's when I started restoration have been in touch with wins to no avail, I recommend looking at your seals lay them out and see if they are shaped like screen. no reply from scotts. Taking Craigs recommendation ordered from Wadhams, should arrive and fit...
I am extremely sorry. I started this thread asking people for advice for where I can get good seals, not how to fit windscreens. I answered a question what seal I was using and briefly stated how I was fitting screen (When I get good seals) having mine out. I am sorry for missing the r & h out...
sorry, underside of vent rubber on car. in the past I have had 3 p6s and fit 2 screens in long ago past. that is how I will fit screens when I get seals that fit. many thanks to all for response. Dennis
fitting screens is easy, fit rubber round screen in the outer flange on lip of both rubbers insert sting that makes it easy to help lipping over chrome, insert all into screen void not not forgetting bottom ledge (separate steel channel) that spans the two jacking points also insert three...
Thanks for info. I installed both my screens dry for a dummy run and I found the front didn't form to curves of glass tops and the rear when seal fitted same also a sod to fit just getting in window recess with seal on took some prizing, the seals are not shaped to glass therefore seals kink...
I agree I am restoreing car and products that don't fit seals diss cap even electronic ignition, thanks for info.Dennis
thanks have sent them email,Dennis
Hi all, I am finally putting car back together after fully restoring it, has anyone refitted front and rear screens using Wins seals. they do not fit, the windscreen channel is 1" wide and seal is only 5/8" there is no way it would seal and they are not shape of screens. It looks like another...
Thanks Willy, received safe and sound cant thank you enough, its people like you that makes this world bearable. Will donate £10.00 on your behalf:). Dennis
Hi Willy, solved a dilemma that I was pondering over, possible rattle metal on metal and water penetrating from wing to inner wing and boot liner, I am going to stick neoprene rubber self adhesive tape to underside of wing ledge. will send photo of difference in new and original seals (not...
Hi Willy, I have just stripped mine down to bare bone and renewed every seal, and found new seals to top of wings stop wings from sitting over inner wing and boot channel lips the new seals are much thicker and the part that fits over the inner wing lip is way too thick, I am going to remove and...
hi everyone. could someone please send me a photo of where the wing meets the inner wing lip under bonnet and where the rear wing meets the inner boot lip. I have stripped mine bare inner sills jacking de rusted her putting back together wings not sitting right and want a detailed refresher to...
hello all, I am restoring my 69 v8 have removed all panels and repaired all and resealed the complete car but come up against a problem front and rear seals do not allow wings to fit over inner wing lips and rear boot lips the new seals are twice as thick, has anyone got any detailed photos...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.