2200 tc carb main jets

Mr A Phillips

New Member
Hi this is my first post. Hope someone can helprovide, I have a 1975 2200tc that runs very rich, after adjusting the carbs the front main jet is way above the venturi while the other looks quite normal.
 
The one that is above the bridge should be running weak so if it isn't check the seals on the choke barrel.
 
Thanks Harvey, I plan to get them off tomorrow to check the float levels again which I did when I fitted new jets and needles to correct the height of the jet so I'll check the choke while they're off and let you know.
 
With the carbs off the first thing I noted was the float in the front carb was about 3mm too low, the other suspect was the manifold gasket as there is damage on the head by someone prising the manifold off, I cleaned this up previously but hadn't noticed that the location stud was damaged and not letting the surfaces to mate. Anyway all good now, running really nice, thanks.
 
Back
Top