Hello everybody.
i have this bw 35 gearbox. which was working fine. but it was leaking badly everywhere.
so i decided to take it out of the car to change the seals.
to remove the front oil pump i had to take the valve body of. i took the pump apart to press in a new seal.
put it all together again .
adjusted the brake band by. torquing the adjusting screw to 10 ft lbs and reversing it by 3/4 turn. and then turn the lock nut.
I have now made a test drive and it hardly reverses and it will not go into top gear.
do you have any idea what i did wrong when i was putting my hands on this transmission.
best regards multi
by the way it does not leak any more ,
i have this bw 35 gearbox. which was working fine. but it was leaking badly everywhere.
so i decided to take it out of the car to change the seals.
to remove the front oil pump i had to take the valve body of. i took the pump apart to press in a new seal.
put it all together again .
adjusted the brake band by. torquing the adjusting screw to 10 ft lbs and reversing it by 3/4 turn. and then turn the lock nut.
I have now made a test drive and it hardly reverses and it will not go into top gear.
do you have any idea what i did wrong when i was putting my hands on this transmission.
best regards multi
by the way it does not leak any more ,