Doors & Wings

Phil Robson

Well-Known Member
#1
As I'm sure many of us have on here, I have too many spares that get in the way.

I'm seriously going to have a thin-out & I'm going to move a pretty good set of wings & a good set of doors on. The wings will be off various cars & some may be without trim holes, but the doors all came off the same series 2 car, so have the trim holes in. It would be sensible if the doors could therefore all go together as they should line up well with each other. They may be missing their front rubbers.

They would need collecting & I'm in East Yorkshire. I just want them to be used by someone & won't want silly money for them - around £60 for each door & £40 for each wing?

I have just had a look at a couple of the doors & tbh they are just starting to go a bit rusty on the lower edge but not much at this stage.

IMG_9462.jpg IMG_9463.jpg IMG_9464.jpg IMG_9465.jpg

Please let me know if you are interested.

Many thanks!
 

Attachments

#4
As I'm sure many of us have on here, I have too many spares that get in the way.

I'm seriously going to have a thin-out & I'm going to move a pretty good set of wings & a good set of doors on. The wings will be off various cars & some may be without trim holes, but the doors all came off the same series 2 car, so have the trim holes in. It would be sensible if the doors could therefore all go together as they should line up well with each other. They may be missing their front rubbers.

They would need collecting & I'm in East Yorkshire. I just want them to be used by someone & won't want silly money for them - around £60 for each door & £40 for each wing?

I have just had a look at a couple of the doors & tbh they are just starting to go a bit rusty on the lower edge but not much at this stage.

View attachment 20045 View attachment 20046 View attachment 20044 View attachment 20043

Please let me know if you are interested.

Many thanks!
Phil have you got any front hinge spacer/shims i need 4 and also a front door bottom/sill seal if you have any please ;-)
 

Phil Robson

Well-Known Member
#5
Phil have you got any front hinge spacer/shims i need 4 and also a front door bottom/sill seal if you have any please ;-)
Sorry, but I’ve only got a few shims which I’ve been using recently to set the 2000’s doors up properly. No sill seals either.....
 

Phil Robson

Well-Known Member
#7
I have now got this set of doors out & they are all pretty good, with only a small amount of blistering on the driver's door.

These will all go on ebay very soon because I think they're only going to deteriorate & I've got another excellent set in storage too :rolleyes:. The issue is the collection, but at a 99p start price they will hopefully tempt someone!
 

redrover

Well-Known Member
#8
HI Phil,

Did these sell in the end? After a driver's door, driver's side rear door and passenger side rear wing if you still have them.

Cheers
Michael
 

redrover

Well-Known Member
#10
Thanks Phil,

Whatever panels I source will go back to bare for a respray, so the cosmetic condition isn't important, but they do need to be very solid - surface rust only really.

But to show the scale of the mountain I have to climb, here's my existing driver's side rear door...
DSC_4457.JPG
there ain't no carcass left!

Thanks for the heads-up on those wings. I only need a passenger rear wing, and that blue one looks like it might be a bit battered!

Michael
 
Last edited:

chrisw

Well-Known Member
#11
Thanks Phil,

Whatever panels I source will go back to bare for a respray, so the cosmetic condition isn't important, but they do need to be very solid - surface rust only really.

But to show the scale of the mountain I have to climb, here's my existing driver's side rear door...
View attachment 21593
there ain't no carcass left!

Thanks for the heads-up on those wings. I only need a passenger rear wing, and that blue one looks like it might be a bit battered!

Michael
That's awful. My scrap doors are in better condition than those.
 

redrover

Well-Known Member
#12
That's awful. My scrap doors are in better condition than those.
Incredible isn't it?!
Ironically, the skin is fine from the outside, with only the usual mild blistering along the seam weld at the bottom, but the carcass itself is completely gone along the 'slam' side. I'm told driver side rear doors are harder to come by, presumably due to condensation and mildew build-up if they are statistically the least opened door..?

DSC_4455.JPG
 
Top