cooper1203
Member
Bit of a long winded one. I am confused as to how the front rubber diff mount is attached to the crossmember on a 3500s 1973. I basically have an oval flange with a bit of rubber through the middle of it. thin bit of rubber sticking out one side and thick bit sticking out the other. when it was on the car the flange was on top of the crossmember with the thick bit of rubber sticking up towards the bottom of the car. both the parts book and the workshop manual show it thick side pointing towards the ground but more importantly mounted on the underside of the top of the cross member if that makes any sense.
Issue I have with this is that would mean the only thing holding the diff in place is 2 5/16 bolts yet they have a great long 7/16 hardened bolt to hold the mounting together
which is the right way please
many thanks
coop
Issue I have with this is that would mean the only thing holding the diff in place is 2 5/16 bolts yet they have a great long 7/16 hardened bolt to hold the mounting together
which is the right way please
many thanks
coop