Gear Odo meter

Hi everyone en Harvey , I took out the gear of the 35 box en yes it's the same as I already have. So che won't fit also. I can take them to a machine chop tho bore them out it is only a 2 mm job. But if you look at the pictures I have made you will see that the right gear is one 1 mm larger in diameter. This is always the problem with gremlins. Is this going to effect the good working of the Odo meter kabel. Always complicated questions, Belgium's have the bad habit of asking difficult things wish you all a nice weekend, en I will come to England this year so don't close the border. Cheers .
 

Attachments

  • IMG_20220618_115951.jpg
    IMG_20220618_115951.jpg
    4.5 MB · Views: 20
  • IMG_20220618_120009.jpg
    IMG_20220618_120009.jpg
    1.6 MB · Views: 20
  • IMG_20220618_120117.jpg
    IMG_20220618_120117.jpg
    4.9 MB · Views: 20
  • IMG_20220618_120315.jpg
    IMG_20220618_120315.jpg
    4.7 MB · Views: 20
Hi Marc.

The one with the groove inside is NOT for the V8
The one without the groove is I suspect for the V8 Rover, but I need to check it against one to confirm this.
 
Yes I know now I already have let it bore out to 30.02 mm witch is the diameter from the shaft of the gear box we are using . So I assume the box is not en originele box for the P6 . Because Harvey confirmed me the gear for the 35 en 65 are the same. Still had the 35 box, en took the gear out en the are the same like Harvey said. But don't fit neder . Went to a machine chop, choold fit now. Hope I am not creating a gremlin.
 
Back
Top