It started with a front screen seal...
- Thread starter mtb_tuli
- Start date
mtb_tuli
Active Member
Update...
ERC0216 heads back in place.
Rocker pedestals shimmed.
Carbs serviced and together with a 2nd manifold (snapped bolts on orig. one) back in place.
Replaced couplings for throttle action to better ones.
New kickdown cable.
Checked TDC position before mounting the heads, correct TDC position is approx 2 degree different.
Next :
Bought cooler for auto gearbox, look for a suitable place.
Hüco fuel pump installed, must be wired up.
SPAL fan bought, not yet installed.
Want to drive..
ERC0216 heads back in place.
Rocker pedestals shimmed.
Carbs serviced and together with a 2nd manifold (snapped bolts on orig. one) back in place.
Replaced couplings for throttle action to better ones.
New kickdown cable.
Checked TDC position before mounting the heads, correct TDC position is approx 2 degree different.
Next :
Bought cooler for auto gearbox, look for a suitable place.
Hüco fuel pump installed, must be wired up.
SPAL fan bought, not yet installed.
Want to drive..