Rover p6b restoration

stue1972

Active Member
Stripped the paint off the offside doors and treated any surface rust with vatcan rust treatment.
Will sand back next week then etch prime followed by high build primer. 20220709_125301.jpg 20220709_125312.jpg 20220709_125322.jpg 20220709_140917.jpg
 

jp928

Well-Known Member
Stu, can you advise please what length of throwout bearing carrier you have in the LT77, assuming that your clutch throwout load feels normal? There are at least 2 different sizes, as below, some in composite, some steel. Rimmers sell a long steel unit, as do MGBD.
thanks.
 

stue1972

Active Member
It's the longer
Stu, can you advise please what length of throwout bearing carrier you have in the LT77, assuming that your clutch throwout load feels normal? There are at least 2 different sizes, as below, some in composite, some steel. Rimmers sell a long steel unit, as do MGBD.
thanks.
one.
I mistakenly fitted the short one first and had to split the engine and box again.
 
Top