Rover P6 3500 ('72) in-boot spare wheel support

T

The Old Guy

New Member
I have the spare wheel, and I have the bolt that fixed something to the side member. So there is a lot missing!
Parts Manual suggests I need the following :-
367191 Handle for spare wheel clamp
367430 Rubber collar for handle
369205 Clamp for spare wheel
368945 Support arm for spare wheel clamp

Does anyone out there have this stuff?
 
I can supply all that but I'm on the other side of the planet (and I'll need to hunt around to find it). I suggest a trip to a wrecker; its the sort of thing they leave on the ground lying around or have a box full of never been bought ones. I presume you don't have the spare wheel on boot attachment? as the parts are quite different.

on some cars the inside boot liner piece is loosely fitted on the spare wheel side, perhaps they're hiding behind it?
 
Thanks Mike. I have tried a couple of our 'nation-wide' breaker's networks, and got nowhere. It seems that the P6 is quite a rarity these days in UK breakers. I'm also living in a small mid-western Wales village, and there are very few breakers yards close by. (And at 78, I'm not too agile either.) My latest purchase of this P6 is an act of pure nostalgia. Many years ago, I had a pair of 2000's and later a 3500. Those were the days! After a Triumph 2.5 PI, 5 Range Rovers, 1 Discovery and 4 Jaguars, it is a relief to get back into a car with much less electronics.
P.S. I'm not at all a fan of the spare mounted on top of the boot. It spoils those beautiful lines, and the rear view.
 
You must log in or register to reply here.
Back
Top