Again Thanks all.
Peter, the blue saga has played out in previous posts, it was taken from a tin of blue brake caliper paint.
Mr Task
Reflectors are to be added, not seen a final design I like yet.
Door mirrors are to be repro Raydot Racing mirrors.
If the MOT man does not object to the front spoilers they will stay.
The speedo is from Speedy Cables, the Eclipse range, ordered with black bezel and white needle, illumination can be any colour with filters. Call them to ask about TUV
Eclipse Gauges
Nothing was cut to fit it, it is 80mm dia. I wrapped tape around the body until it was a snug fit in the circuit board then made some 5mm thick O rings to seal the gap between the bezel and the aperture in the original black facia.
I had bought a transducer for an SD1 from Rimmer but alas it was dud, so I had to make a chopper wheel and mount it on a cable drive at the gear box then mount a speedo sensor to look at the wheel, bit of a faff but it works well.
Oh the other thing, the Eclipse has a trip and set button on the glass, but this is behind the Rover glass so I ordered a trip button on a fly lead and have the button on the little removable trim panel on the right of the gauges, it all looks factory.