Recent content by cjhols

I gave them a call a few months ago and they said they were having trouble getting them.

Hi does anyone know the issue with the Mocal PC1 Rover V8 Oil Pump Cover supply problem. I've been waiting for 5 months from a Mocal distributor and still no show??? Thanks

Hi all, I believe there is a supply issue with the part - Oil Pump Cover/Remote Take-Off - RO1105 Oil Pump Cover/Remote Take-Off - RO1105 | Rimmer Bros and was wondering whether I couldn’t use the alternate - Oil Pump Cover Assembly With Take Off - BHH998 Oil Pump Cover Assembly With Take Off...

Awesome thanks - I'll look into it, Thanks

Sorry that was supposed to be 'sprockets' - So they are the same????

Hi all Are the timing chain, spokes and cam followers the same in all Rover V8’s and Range Rover P 38’s ? Particularly the Rover 3.5 Thanks Peter

So the short answer is that this is normal ??? Thanks

Hi JP and thanks, On another question is it typical (ok) for water to run through the inlet manifold (front and rear). I was cleaning the heads and noticed if I sprayed water down the front water journal (on the head) water would come out the front and rear inlet port - on both heads and I was a...

Hi all, I wanted to check the specs for a Rover 3.5 to gauge the wear of the internals. I was looking for main bearing and cylinder bore standard sizes with tolerances (and any other if you have them). Thank You Peter

Hi all, Newbie here so be kind:);). I am pulling down a 3.5 Litre Rover engine and wanted to ask is it typical for these engines to have a large build-up of oily sludge under the rocker cover and in the valley's? Also, whilst I am doing this is there anything, in particular, I should be looking...