quattro's latest activity
-
I glued together bits of hollow D section soft rubber extrusion using a quality supper glue. Worked a treat. -
quattro replied to the thread Electric Fans.I bought a cheap one from a local supplier and it was awful, allowing the car to overheat if in traffic on a hot day. I then bought a...
-
quattro replied to the thread P6 Wiper blades.I got mine from fleabay, just the rubber bit and messed around until I got them to fit my wiper arms.
-
quattro replied to the thread Oil Sump Pan Removal.I'm pretty certain that I undid the engine mounts and lifted the motor an inch or so to get better access to the bolts across the front...
-
quattro replied to the thread Neatening the boot lining.Link here: - https://www.classicroverforum.net/index.php?threads/boot-interior.45307/post-405633
-
quattro replied to the thread Oil pressure.This is the front timing cover from the inside. The large drive to the left is usually bolted to the front of the camshaft. The dog gear...
-
-
quattro replied to the thread Oil pressure.Clockwise. Careful you don't drop it into the timing cover :) The drill will spin quite freely when you start, but will change tone as...
-
quattro replied to the thread P6B S Project Car.I came across the picture when looking for something else and just thought it would show what JP was up to. I hadn't refitted the fuel...
-
I think he is now injected?
-
quattro replied to the thread P6B S Project Car.I would imagine it's rather difficult with the engine in place, that pesky little thing is obviously best changed with the engine out...
-
-
quattro replied to the thread Steel Wheel Rims.It looks like you have some 5Jx14 from a 4 pot and some 5 1/2J x 14, from a V8. Are the sizes stamped on the wheel anywhere? Not sure...
-
quattro replied to the thread Steel Wheel Rims.I was under the impression that the offset on a P6 is 40, on all of the wheels. My Vitesse wheels are 6.5J x 15s but still with a 40 offset.
-
-
The centre scoop just allows cold air into the airbox. There is a flap on the airbox intake which can move up and down to change the air...
-
quattro replied to the thread Tie rod hit the inner wheel housing.That looks strange to me, that's quite a shim behind those mountings. Could be the result if a repair following an accident? As JP...
