brake servo cyl seal kit (lockheed)

westOz74P6B

westOz74P6B

Member
would anyone in Oz or NZ have a part No. (PBR part No. if possible) for a seal kit for the lockheed slave cylinder on the servo (booster), I've tried the pbr website search with no luck and the bake parts vendor i usually use has no listing either, thanks in advance,
Scott
 
Hi Scott,

I don't have a PBR part number for the kit, but I do have the Lockheed part number which is SSB 1065, LK 11065. The box has both upon it and covers the vaccum chamber diaphragm too.

Hope that is of some help in cross referencing.

Ron.
 
I did a search and found these PBR part numbers Scott. Don't know if they suit the Booster slave cylinder, but at least its a start.

ACTUATION Kit-C M/Cyl (Min) 09/1967 - 07/1987 V8, 3.5 LITRE, 15.87 mm K7167X
ACTUATION Kit-S/Cyl 09/1967 - 07/1987 V8, 3.5 LITRE, SDI MODEL, 22.22 mm K655S
ACTUATION Slave Cylinder 01/1969 - 12/1978 V8, 3.5 LITRE, P6 MODEL P5140#(NLA)
ACTUATION Kit-S/Cyl 01/1969 - 12/1978 V8, 3.5 LITRE, P6 MODEL, 22.22 mm K655S
ACTUATION Kit-B M/Cyl (Min) 10/1969 - 12/1974 DISC/DISC, V8, 3.5 LITRE, 22.22 mm K7679X

Ron.
 
You must log in or register to reply here.
Back
Top