Hi all,
Found out the steering gear is at fault. With track and side rods off I could still only get 1.5 turns left, 1.75 right.
Sounds like the drop arm could be fitted in the wrong place on the splines.
Hi all,
Found out the steering gear is at fault. With track and side rods off I could still only get 1.5 turns left, 1.75 right.
"£8000 for the whole deal" – erm, how about "No!". That's too much. Waaaay too much. I think I'd be looking around other bodyshops for more quotes!
Nice wheels. Do measure the back space (wheel facing down ruler across the top and measure between it and the face which the hub presses against. Do it with both a steel rim and your new ones. The steel ones are 14 x 5.5" the minilites are 14 x 6" so wider and you'll need to know which side is wider....and check the nuts aren't metric....
M
Just to be clear are you referring to the collars on the diff output shafts? JRW sell them new. Or you can get a local machine shop to make them from these drawings.Yes
To change the seals new spacers are needed.