thamesroverp6
Member
hello one and all, can i have some help/info please, i have to reassemble the linkages to the SUs after refurbishing the heater assy, and i look at my manual and it shows the choke cable attached to the LH SU side if i have HIF6s (which i have), but the choke cable was attached to the RH SU ,as if i was supposed to have HS6s. But would it really matter? They linkages still seem to operate the same way.
Another question please, there is some play (sideways obviously) in the throttlle rod that goes through the firewall. the play can be taken up at the bracket just above the acelerator pedal, but is this necessary to do?
There would be approx 4mm of play
Thanks for any information , Karl
Another question please, there is some play (sideways obviously) in the throttlle rod that goes through the firewall. the play can be taken up at the bracket just above the acelerator pedal, but is this necessary to do?
There would be approx 4mm of play
Thanks for any information , Karl