Recent content by cfcrotweiller

Theres me thinking this would be a hefty job (car to mechanic, money, time, money etc), and I managed to get it done in an hour and a half today while the kids had their afternoon nap! Unscrewed straps holding tank down, took the arm off that leads up to fuel cap, wiggled a bit and the thing...

OK so Hammer and Drift should hopefully work. You say proper fittings, how exactly are the fuel lines connected at the sender end? Can they be prised off easily?

The fuel pipes look original, very discoloured and I assume they have jubilee clips on the end? If I can get these out (which may not be tooo hard) then I could attempt at the sender unit but I thought you need a specialist tool to unscrew it? Getting both hands under the car to do this will be...

Hi Guys, I think the fuel tank sender seal (bottom round seal beneath the fuel tank) is knackered as its all saturated in fuel and every time I used the the car there would be the alarming smell of fuel. I´ve bought some sender unit seals off Mark Gray (UK) so I think I have the right parts but...

How about rubber vs PVC braided hoses (I think the ones on the car are PVC? They are definitely original from discoloration etc). Perhaps a good indicator of longevity?

Ron, Cheers for that. I will ensure internal diameter remains the same for obvious reasons. I just assumed rubber hoses will be subject to the elements (not exactly heat, apart from gearbox perhaps? More like moisture, water, dirt etc from driving surface. Mine almost look just held under the...

As the title suggest, I need to replace the tank seal and also noticed the fuel lines that run under the car are dangling and parts look like they are leaking slightly (Im sure standing still for 30 years didnt help). I am going to replace the fuel lines (I think there are 3? - one for main fuel...

OK, so a diff from a 2000 and the ZF 4 speed auto seems to be a very possible swap (Im all for straight swaps, I'm not too keen on huge modifications, especially as my gearbox/suspension knowledge is limited - for now!). Im not looking for distance trips, more like sunny drives through the...

So if the first 3 are the same as the stock 3 speed auto, there isnt any real gains (when I meant more torque I thought the ratios were different allowing for more pull through the gears etc). I would only opt for the 4 speed if the ratios were different which gave better acceleration. I'm not...

Rich is that a 4 speed auto instead of the 3 speed auto I have at the moment? Apart from the extra gear, does it give better torque/power through the ratios? Would I need to do any modifications to the car at all to take this gearbox? Cheers Andy

Just had a quick look at the car (rear door etc). I understand now the issue, in fact the D post is an issue even with 205's in my view, possibly on the tight fit side! Trying to think out of the box (im sure this has all been said and done), but are there ways around fitting wider tyres? At...

Hi, Looking to start a resto project soon, and thinking about possible spare parts. I live in Portugal so prices aren't like the UK.... Are there parts that exist from other manufacturers/models that will bolt on to the P6 V8? Things like rear diff, auto gearbox (mine is 3 speed auto box...

Well definitely an interesting topic i've opened!.. I think I'd be dedicated to fulfill the job and hopefully do a good job of it. My drawbacks are whether here in Portugal they will start questioning stuff at the inspection - in which case im screwed as most of the work seems irreversible...

The second last pic is the one I originally posted. In terms of the rear open arch and flared arches, this is very cimilar to what I am looking for. Non of the other racing additions, just the arches. I don't want larger diameter wheels/tyres so overall diamete should remain pretty much the...

Plus I want to do both. I want to open the rear arch to expose the wheel and I want to flare both front and rear. When I start the resto project I will post a topic here of all the work carried out, so it will probably be a 'learn as you go' project (in terms of panel changes anyway).