Recent content by lil nicky

  1. lil nicky

    ROVER P6 3500S

    FOR SALE 1975 Rover 3500s. The car is finished in Westminster blue with mango coloured boxpleat leather upholstery. She has 15" minilite wheels and virtually brandnew tyres all round. New carpets throughout. 95,000 miles on the clock and MOT until June 2015. The vehicle was subject to a...
  2. lil nicky

    retrofitting efi?

    Hi, Exhaust and filters sound good. Fan too as they're all simple stuff. With regards the gearbox, I'm guessing it needs to be the LT77 from the SD1 for the ratios. My assumption is anything from a land rover or sherpa van would not work well in a car?
  3. lil nicky

    retrofitting efi?

    Hi, I'm thinking about making my 3500s more fuel efficient so as to employ it as a daily driver. Swapping the gearbox for a five speed from an SD1 seems reasonabley straight forward, but what about efi? From what I understand I'll need the injection manifold from something like a late 80's...
  4. lil nicky

    FOR SALE 1975 ROVER 3500S

    thanks, i restored her a couple of years ago and always intended to keep her for a very, very long time. Sadly my health has now got in the way and I am forced into letting her go. Hopefully she'll go to a good home and be looked after.
  5. lil nicky

    FOR SALE 1975 ROVER 3500S

    Rover P6 3500S. 1975, 93000 miles, 3.5l Rover V8 with four speed manual gearbox. Westminster blue with black vinyl roof. Mango coloured boxpleat leather interior. Minilite alloys. Tax until Oct 2012 MOT Feb 2012, but will renew before sale. Stripdown and rebuild in 2009, including...
  6. lil nicky

    otter switch - snapped bolts

    Could you expand a little, I'm what you'd call a rookie
  7. lil nicky

    otter switch - snapped bolts

    I've left the third in place while I make a new plan, but they seem to be pretty flush with the surface.
  8. lil nicky

    otter switch - snapped bolts

    Hi Just tried to remove the otter switch on the inlet manifold and managed to snap two bolt heads off! Any ideas for getting the rest of the bolts out? :D
  9. lil nicky

    triumph spitfire wanted

    Hello chaps, Bit random I know, but now my p6 is finished (well as finished as these things ever are!) I'm after a new project. Ideally I'm after a spitfire but whatever it is it needs to be tax exempt. Not got much in the way of funds so a non runner needing work is more than fine. I live...
  10. lil nicky

    Radio Ga Ga

    fellas, i need to keep it simple, elastictrickery just aint my bag. I follow the four switch thing, seems simple enough. wouldnt be shy at having a bash at the relay buisiness either. I guess to do that I'd have to take the lid off the 8 track?
  11. lil nicky

    Radio Ga Ga

    i take it by switch you mean a on/off/on toggle switch for each side?
  12. lil nicky

    Radio Ga Ga

    This one has speaker wires. one for each side. where could i get a mixer thing from then?
  13. lil nicky

    Radio Ga Ga

    Hi, Turns out the both the radio and the old power supply had died, so I isolated the old supply, ran a new one and plumbed in a spare radio. And all was well. Until I decided to look at my 8 track player, which leads me nicely onto my next question; there is no aux port on the radio so I...
  14. lil nicky

    Radio Ga Ga

    I know the radios earth is good, I put a new one in when I fitted the radio about six months ago. I haven't used it much since due to poor reception hence the booster, but when I tested it prior to fitting the booster it was dead. I've tested the live feed and it's dead, so I need to know...
  15. lil nicky

    Radio Ga Ga

    Hi Guys! I need help. I've just bought a in line signal booster for my radio. Great I thought, I'll finally get some tunes in the car. Not so. Got in to plumb the thing in and the radio wouldn't come on. I've done a bit of poking about and there is no power getting to it. I've traced the...
Back
Top