Search results

Fit flywheel off 3.5 SD1 onto 3.9 that was auto. Any issues with balance with this swap? Spoke to someone years ago that had done a few, reckoned he hadnt had an issue. Also, just curious, can Landrover V8 flywheel be modified to use in an application as above? Cheers guys

Any one clued up or know where to find information on installing an injected 3.9 into a 78 SD1, retaining the injection. Yes I have the loom ECU.

Just got back to this, previous replaced kickdown cable, cam returns correctly etc, charged fluid, filter, adjusted bands. Problem is that to get the inner cable to attach to carb linkage, It requires the outer part of the cable to be wound up to high, resulting in a fairly harsh engagement into...

Rebuilding a V8, seems to be a bit of info one way or another as to the torque values to use. Rodbolts are easy as you just measure the bolt stretch, ideas re head and particularly the mains is inconsistent. Suggestions run standard for the head fasteners and about eighty ftlbs for the mains...

BW65, replaced kickdown cable, adjusted so heel of cam contacts the downshift valve at closed throttle. Having a look at the other four or so boxes sitting around, note that none allow the cam to return to this position with the crimp in as supplied position, and no, clearly the crimps are all...