Search results

Very sad news indeed, please pass on our condolences to Richards family. Richard was one of life's good guy's, and we will all miss him as a friend and Rover Guru. Mike Breading.

Hi Guys, Many thanks for the replies: My friends 3500 auto had been already converted using a 2000 pedal box by a previous owner, and that you can only get a feeler gage between the exhaust manifold and clutch master cylinder :shock: and is not ideal at all, and with missing/leaking fluid most...

I would be interested to know if anyone has converted a V8 Auto to manual box :D I am especially interested the clutch master cylinder arrangement, I'm aware of the closeness to the exhaust manifold using the 2000 pedal box but has anyone done the 's' pedal box fitment, along with all the...

Spotted on Gumtree:- http://www.gumtree.com/p/cars-vans-moto ... 4/78156067

Just to report:- Now that I have successfully established how to bypass the 'Ballast Resistor' with the help of other forum members on my late P6 and different set-ups with the P6 V8 range, I'm now at last up and running :D with a more smoother running and easier start up. I can say that I...

Hi Stan, Yes the wiring diagram is the same as yours, and when you think about connecting to a differnt power suply it makes sense! I will give it a go tommorrow and hopefully all will be resolved. :) Many thanks to you and Will for your responces and help. :D Mike.

Hi Will, Many thanks for your reply, spent a couple of hours this afternoon dismantling dash and fitting my electronic ignition and after cross referencing with the Rover workshop wiring diagram for my 3500 from chassis suffix ‘E’ have came to the following conclusions:- It seems that the...

I have a later V8 and the ballast resistance is incorporated in the main dash harness according to the workshop manual, can anyone please advise how to bypass this resistor to enable me to fit this electronic system from Simonbbc! Mike.

Just to update what I have left of the boot mount kit:- The locking device that is bolted to the underside of the boot which is intact and the large supporting boot frame. I now only need the 'cup' that locks onto the top of the boot that the spare wheel rests!

Richard, Hope you'll soon be feeling fine The way you were before Because things just won't be the same Until you're well once more :)

Found this very interesting site of old film archive of central England by Mace, (Media Archive for Central England) but only two of the P6 related films have to date been uploaded. As can be seen that about 22 pages are available if you search Rover, the first link is of 114 FLK and the second...

Hi Demetris, Yes no problem, send me a pm with your details. Mike.

Cheers Nick, many thanks. Chris, as explained I need more than one for my project for the fitment of my roof lights! I do have other bits of the kit that are not required if anyone else needs them, stay, bracket, cup etc! Mike.

Bump! Items still required. Mike.

Wanted:- metal locating ring that sits on top of boot lid and boot badge holder that is used when wheel not fixed to boot, badge not required or condition of holder is important, as it will need to be cut/altered!

Wanted: The rear small spring that steadies the handbrake mechanism from caliper to diff. I have tried all the main dealers without any success! Happy to pay and cover postage costs. My thanks in advance. Mike.

I do feel that now is the time to have a donation facility (PayPal or other electronic means) so that we can contribute to the The CRF for the upkeep and maintenance :!: and especially if a sales section is to be added. I for one would be happy to show my appreciation, as I do visit here like...

Re: First car and first project. When I purchased my Omega it had those type of dust caps fitted, but unfortunately they welded themselves to the valve :( which resulted in that all four tyres had to be removed and new valves replaced :shock: The Guy at the tyre centre said that 'this was...

I had the same problems! but you must now use this new address http://www.classicroverforum.com to ensure signing in! Happy New Year everyone. Mike

Hi Martin1973, I have sent you a PM. Mike.

Received this email today and thought that I would share it with everyone! maybe worth a vote and tuning on to GTFM on Thursday! Mike. THE GTFM “DRIVER’S SEAT” “Greatest Practical Classic of All Time” BIG VOTE - SPRING 2009 Hi Mike Let me introduce myself. I’m Ian Edwards, car-nut and...

Sorry, no trace on Club records! Mike.

Hi Barten, That will do absolute fine, but It may be safer to send me your card details via a personal message here! Regards, Mike.

Hi Quattro, Yes, you should have received a December issue! Please PM me with you membership details or give me a bell on 01205 270065. Regards, mike.

Hi Barten, No problem with downloading & using the New membership form for renewal as long as you put your membership number, name and post code and write renewal on the top of the form it will be fine! At this point, just a gentle reminder for members who have not yet renewed membership for...