Fluid resovoir pipe - What to use

B

BBLongman

New Member
Can anyone tell me what sort of pipe to use when connecting the resovoir to the clutch and brake master cylinders? My exisiting pipe seems to have gone porus.

Bennet
 
BB,

I used a piece of the fleix hose from halfords for the brake fluid res.

It was graded for fuel and I don't think it is upfor the job. probably best to find a company that make brake hoses or use an old one and cut the ends off as it is quite a short piece.

Colin
 
Not sure if the bore is adequate but you could buy the cheapest brake flexi hose (e.g. ford escort front flexi should be cheap) and cut a section out.

Richard
 
Hmmm. I'll ask Weekley's what they use. Or failing that i've got to go to my local hydraulics specialist soon to get a goodridge clutch hose altered. See what they recommend.

Bit of a mistry at the moment. Do remember reading something in Practical Classics but I only read it at the shelf these days so don't have the copy lying around.
 
You must log in or register to reply here.
Back
Top