Lost Full Beams and Horn

F

Fraserp6

Member
As the subject title says, last week I lost my full beam toggle (however, the flasher still works) and the use of my horn. The Fuse seems fine as do the earths, which led me to the connections in the driver's glove-box... These also seem fine.

Are there any other know faults? The bulbs are good and having had all wheel and the centre column stripped there appears to be no damage to switches.

Any suggestions or advice would be appreciated.

Thanks

Fraser
 
It is common for the contacts in these switches to burn out. Try to take the switches apart and clean the contacts. It's not difficult.

Demetris
 
my rosie did the same, check your fuse box the fuses are connecting, i kept looking checking wires etc, and it turned out to be that the fuse was ok but was nt connecting with the two things that it sits in, ( you like my tech talk lol),so somethings worked and some did nt, just check they are ok , and connecting mine wear worn :eek: , so i will be replacing fuse box this winter
marcus
 
You must log in or register to reply here.
Back
Top