Lister John
New Member
Hi All,
My new front calipers have arrived from Winns so Ive set to doing the brakes, starting with the rear first:
Someone had started this job before as there was only a feed to the o/s rear caliper and it wasnt linked to the n/s one.
Also the n/s driveshaft only had 2 bolts out of 4 holding it on!.....(I'll come to that later).
Anyway the new brake hose in the picture was one floating around in the boot which I thought would be the link pipe between calipers but its not long enough.
Which of the holes does the link pipe go in? ie supply to rears in top right, then out bottom right and across to top left with the bleed nipple going bottom left? (As you look at it in the picture)
As you can see I removed the diff to do this as its sooooo much easier.
Also has anyone got a spare 2 driveshaft securing bolts and spacing washers please? for my missing ones.
As always many thanks from a "learning p6 owner"....John
My new front calipers have arrived from Winns so Ive set to doing the brakes, starting with the rear first:
Someone had started this job before as there was only a feed to the o/s rear caliper and it wasnt linked to the n/s one.
Also the n/s driveshaft only had 2 bolts out of 4 holding it on!.....(I'll come to that later).
Anyway the new brake hose in the picture was one floating around in the boot which I thought would be the link pipe between calipers but its not long enough.
Which of the holes does the link pipe go in? ie supply to rears in top right, then out bottom right and across to top left with the bleed nipple going bottom left? (As you look at it in the picture)
As you can see I removed the diff to do this as its sooooo much easier.
Also has anyone got a spare 2 driveshaft securing bolts and spacing washers please? for my missing ones.
As always many thanks from a "learning p6 owner"....John