Search results

As title I need one cos mine's snapped :shock: to avoid any confusion it's for a 4cyl & it's the rod that threads through the pedal & attaches to the clutch master cylinder with a circlip. So if anyone has an old cylinder that still has a pushrod I would be very happy to take it off your hands...

I loaded up my ZT-T & took myself on an action packed mystery tour back in July starting on the Wednesday I set off sharp & travelled down to Colchester to see my mate, I arrived at lunchtime so we went for lunch (seemed only right) & then we scoured some of the Essex scrapyards then on the...

Well you lot took some finding :roll: but after a tip off I've caught up again :lol:

How's everybody keeping? sorry I've not been on here a lot lately other things going on. Not made much progress with the P6 for quite a while as it got evicted from where I was working on it but I've bought myself a compressor & been collecting air tools & stuff so I can get on with it again at...

A member of another forum I go on is looking at a '72 3500 with a G/box issue, he says in his words "Reverse has gone, spring on the reverse valve has snapped" I'm guessing it's a case of stripping the valve block & replacing the spring but thought I'd run it past you first & see what you...

My friend with the 95 is having running problems which I suspect are mainly down to a knackered dizzy & low octane petrol, but one P4 "expert" has told him it's more likely to be the valve timing 180 degrees out :shock: Surely it just wouldn't run at all or are we missing something?? Regards Col

Do any of you have any pictures of the rear g/box mount on a non overdrive P4 or has anyone changed one, reason being I have been asked by a P4 owning friend about the subject & he has been given some very dubious advice & I just wanted a clear idea before I advise him Regards Col

Has anyone heard from Zardoz recently?? I used to be in fairly regular contact with him & I sent him a PM on June the 7th which he has never read & his last activity was June the 5th, I have emailed him since & still nothing :| Any members from the Chester area seen him?? just a bit concerned...

As much as I love it I've decided I'm sick of buying petrol for my beloved Volvo 940 so it's going up for sale & I've bought this to replace it, it's a 2003 ZT-T CDTi & it uses half the fuel which is nice :D

I got word of a 3500S & went to see it yesterday it's N reg Davos White/Black roof, black cloth interior. It's pretty complete but is in poor fettle but the old guy wants rid now there's very little on it for me so I dont really want it but if it's any good to anyone I can arrange a viewing it's...

This is a question to any of you who are Volvo experts or know a bit about Bosch LH Jetronic. My 1997 940 Turbo fitted with a B230FT engine has a problem, the Lambda light is on constantly & it is running badly & very thirsty. It had a new Cat & sensor just over 2 years ago & has been laid up...

I went down to "my" yard following a tip off that some of my cars were gone & it turns out there was a scrapman in crushing stuff & because my cars weren't complete he considered them to be scrap there for the taking. I've lost my 2 3500S spares cars with nice V8s & S boxes & my Magnum Coupe...

It's been snowing here all day but I've measured the depth & it's only about 2 to 2 1/2 inches deep despite what the traffic reports would have us believe, saying that though I've just had my Dad on the phone he says my Mother's going round with one wellington on cos they said on the radio there...

Alright knocked off them to be honest. This morning my neigbour was struggling to get off his drive due to the thin dusting of icing sugar we got through the night & me being community spirited & an all round nice lad I went over to lend a hand using bits of wood etc. to assist with grip when...

My brand new, lovely, mint, perfect, still in factory green primer Bedford CF door did £26.00 :cry: & some grotty old mirrors did £70.00 :shock: You just can't weigh it up :?

I was driving through Coopies Lane Ind Est today at lunch time & was passed by a yellow Merc Vito flashing it's lights at me so I turned around to find it was my mate who has just got a new unit on the estate so we were chatting & he said "Are you busy for an hour or so?" "Nope!" "Fancy giving...

I was just browsing on the net & found mention of a Vauxhall Viscount which reminded me of a very funny story I was told by a couple of local lads who specialise in the posher Vauxhalls. I was at their place one night when I had my Royale & there was a Viscount in the yard with a damaged nose &...

A few weeks ago I was contacted by a customer looking for kingpins for his ageing horsebox & he was really impressed with how much interest I showed in finding the bits for him, which I told him was because I'm into old vehicles etc. so the conversation developed from there & when the subject of...

I've just spotted a fantastic story in today's Newcastle Journal, an elderly Doctor from Gosforth (just down the road from me) has recently died & his Nephew has been given the task of clearing out his garages & found a 1937 Bugatti Type 57S Atlante which it is estimated could fetch six million...

Does anybody have a picture of the rear seat reading lamps that fit in the back of the ET headrests? or can you tell me what they are the same as cos I quite fancy fitting a set. Or even better still has anyone got some I could purchase? Regards Colin

Did everybody get their wishes? I got my sweets but there was no tractor under my tree this morning:roll: Oh well maybe next year eh! Regards Colin

Happy Birthday Richard :D You'll need to borrow John's compressor if you know what I mean :wink: Best Wishes Colin

YES!!! I've got some static seatbelts for my car & to me they seem to have been assembled wrong from new. The short strap which mounts to the tunnel is fine, the lower mounting which mounts the lap part of the belt to the lower door post seems ok but the upper bracket which mounts the shoulder...

Many happy returns John How ya goin to blow all them candles out :?: :lol: :lol: :lol: :lol: :lol: :lol: Best Wishes Col

Hi folks has anybody got a spare power steering pump pulley off a V8, my mate Tom is converting his 3500S to P.A.S. & is short of a pulley. I'm sure he would happily pay a sensible price & of course any postage costs. Regards Col