DAK
Active Member
I installed the alternate fuel tank sending unit as described earlier in this thread. The hope was to get improved accuracy. I hit a stumbling block when I tried to attach the fuel lines. This reproduction unit has the two fuel connections too close together to attach the original OEM fuel lines. I made a small modification with to the way the lines attached and was able to get everything connected. Not what I would have preferred but it should work. I have the 55 litre tank. The good news is that I added 6 litres of fuel (the reserve amount) and the gauge still read as empty. I added another 20 litres and the gauge read just under half full. Hopefully it will read full the next time I go to a filling station and top the tank off. So far, this is much better accuracy than the old sender.