i have a rover 3500s converted to 5 speed SD1 box. speedo is wavery and reading wrong so i suspect a worn cable. do i need a new SD1 cable or a normal 3500s one off 4 speed box? thanks
I modified the standard 3500S cable to fit. Other than that it's either have a custom cable made, or bodge the SD1 speedo into the P6 dash, which I have heard of. Can't say I'd do it though.
i there yea there are a few way's to do this u can get a sd1 cable and change the end piece to the speedo i did use a p6 end and tape it up did work fine untill i change the dash or use a p6 cable which is what i am using on mine now well its a 2000/2200 cable but the long 1 and squashed the gearbox fitting bracket to fit the end bit of cable and works great or you get a new cable made up to fit both ends and if yr speedo is reading wrong all to gether you will have to get yr speedo recalibrated which speedy cable do i not long had mine done
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.