Brake light coming on

[codekiddie]

No pad wear sensors on 4 pots.

Cheers Harvey. I learn something new everyday on here

 

[Willy Eckerslyke]

If so, then with the reservoir wire disconnected the light should not come on at all, unless the handbrake is applied, (which we know works in this instance), so if it still flickers then it is not a problem with the reservoir switch. Likewise, if the flickering goes away then it is the reservoir switch at fault.

Quite. Can't really see the point of speculating about other causes until this simple test has been carried out.

 

[The Rovering Member]

The handbrake switch was the culprit on one of mine (position adjustment) & the reservoir float on another. Both easy to check & easy to fix & far more likely than some crossover in the wiring circuit. As stated, it'll be best to carry out some simple tests on known causes before you start worrying about improbable faults in the loom that probably don't exist.