Electric Wiper Delay Unit
- Thread starter SydneyRoverP6B
- Start date
If interested please find here my test result with the above electronic wiper delay relais from BMW/Hella.
I attached the connectors from the pneumatic wiper delay governor directly to the electronic delay without a separate wiring loom (DRC 2021) and adding a earth wire and an additional wire on port 53a. Et voilà. Works like a charm with a fixed interval of around 6 seconds.
As you can see, i have still the pneumatic delay governor mounted, which i was able to overhaul and make it work again by cleaning the inside and replacing the foam rubber on the top of the non-return valve. I also had to repair the wiper park switch which can be split into two halves to get to the internal contacts and clean them. After cleaning it, it can be glued together with Araldite (two component glue). It seems, that an indentical park switch, which can be screwed on the housing, is no more available.
I attached the connectors from the pneumatic wiper delay governor directly to the electronic delay without a separate wiring loom (DRC 2021) and adding a earth wire and an additional wire on port 53a. Et voilà. Works like a charm with a fixed interval of around 6 seconds.
As you can see, i have still the pneumatic delay governor mounted, which i was able to overhaul and make it work again by cleaning the inside and replacing the foam rubber on the top of the non-return valve. I also had to repair the wiper park switch which can be split into two halves to get to the internal contacts and clean them. After cleaning it, it can be glued together with Araldite (two component glue). It seems, that an indentical park switch, which can be screwed on the housing, is no more available.