302Rover
Member
Looking at the illustration of the front suspension in the service manual I see reference to a mysterious 'set bolt'. The outer top link mounting bracket (pivot block) has a 3/8 threaded hole and the illustration shows the following for that hole:
"Set bolt (3.8 in. UNF x 1 3/8 in. long) fixing stiffeners to outer mounting brackets".
So my question is: what are these stiffeners? I don't have either the bolt in the hole or the stiffeners. Hopefully someone can help me out here, perhaps with a photo of the stiffeners or explain what the stiffeners are for. Thanks in advance for any help.
Cheers,
Tom
"Set bolt (3.8 in. UNF x 1 3/8 in. long) fixing stiffeners to outer mounting brackets".
So my question is: what are these stiffeners? I don't have either the bolt in the hole or the stiffeners. Hopefully someone can help me out here, perhaps with a photo of the stiffeners or explain what the stiffeners are for. Thanks in advance for any help.
Cheers,
Tom