justthisguyhere
Member
So I have a rover 3.5l v8 it's the 10.5.1cr motor I have read about people swapping the heads to sd1 heads so they can use unled fuel is this the same if I was to put rover 4.6 heads on? And will I need the 4.6 rockers or can I use my 3.5 rocker Assembly and push rods? I'm guessIng I will have to change to the compost head gaskets too? (Will I need the composite inlet gasket too? Or I keep it steel?) Then shim the cam And I just don't use the 8 extra cylinder head bolt holes?
Thanks for any information you can give me
Thanks for any information you can give me