Cherryroverp6
New Member
Hello everyone I've been continuing to try and find out why my 67 rover tc 2000 won't start. Ive set the timing to the EP mark on the flywheel to the camshaft. She no longer started after this. I've got compression and spark. Fuel, I proceeded to adjusting the distributor with no difference. (Originally I set the timing to the pin in the flywheel which didn't match up with the cam pin. Then I adjusted It to the EP mark as I've been corrected) plugs are wet and smell of fuel. Still but getting spark outside the engine when testing the plugs for spark. And they are brand new. The mystery continues. Here is a photo of the cam and flywheel before I made any adjustments and ran lumpy before this. And as mentioned not at all currently.