P6 Sump and other V8 bits needed

[Kman1600]

Hi All,

We are putting together another engine for our P6 Historic road rally car and would like to gather up various P6 specific bits so as to avoid stripping the current engine too much, it runs very well and if possible we’d like to keep it as a ready spare.

We Need:
Sump
Windage Tray
Oil pick pipe
Front pulley
Alternator bracket
Throttle linkage bracket

We might go as far as:
Complete SU inlet
SD1 Manual flywheel

It really would be nice to leave the current engine sitting very complete and ready to fit quickly if anything was to go wrong mid-season and necessitated an engine swap, if needs must we can pull these last 2 items off the current engine. We are trying to put a plan together to be at the 50 year celebrations in late June, a few bits of the jigsaw still need to be put in place but we are hopeful of being there, so collection is possible?

Thanks, Tim

 

[harveyp6]

I have a pulley, a windage tray and an oil pickup, I have a sump and although it's not very straight on the bottom it would do to ship the other bits in if nothing else. If I knew what throttle linkage bracket you meant I might have one of those as well.

I imagine that the shipping costs to NI with the weight, (particularly of the pulley) and the size, will probably be pretty steep though