mrtask
Well-Known Member
After a few months in which I've had very little time for with my rebuild project I've been able to spend a couple of days in the garage. I've pressed all the knackered bushings out of the suspension and separated the bottom link struts from the front suspension bottom links. The 4 rear top link metalastic bushings look like they're in good condition but all the others were toast and will be swapped for new poly bushes. All 6 front ball joints are in good order but the rubber boots were perishing and had splits in. Can I get new ones and the little spring-like retaining clips separately?
What anti-corrosion treatment should I use on the swing arms and rear crossmember? I was thinking about sandblasting and powdercoating. Any advice most welcome!
What anti-corrosion treatment should I use on the swing arms and rear crossmember? I was thinking about sandblasting and powdercoating. Any advice most welcome!