SD1 Vitesse Wheels -15"

[smokin1942]

I've got 6 x 15" SD1 wheels which 'as any fule know', won't fit a 4 cylinder P6.
Um, I didn't know, but I do now!

4 are bare and 2 have still got scrap tyres on.
The gold paint appears to have been applied with a bogbrush, I started to clean one wheel as seen in the pics but gave up when I realised I couldn't use the wheels.
They really need Dip'n'Strip treatment or a lot more patience than I have!
There are a full set of SD1 wheelnuts in rough condition (can't be used on P6 studs) and 4 centre caps.
1 wheel has a heavy kerb mark as shown but I can't see any damage in the well.

Collection Only -I am about a mile from M25 J28 in Essex.

£50.00 the lot or make me a (polite) offer.

Regards John

 

[WarrenL]

That kerb damage can be repaired by a wheel outfit for surprisingly little money and the wheels can be sandblasted. It cost me about NZ$150 to have my four Series 1 SD1 mags blasted, and about the same again for powdercoating.

Just a couple of thoughts for anybody who might be interested.

 

[testrider]

I've got 6 x 15" SD1 wheels which 'as any fule know', won't fit a 4 cylinder P6.
Um, I didn't know, but I do now!

Isn't it just the top links on the rear suspension that need changing for V8 bent ones to allow these to fit?

 

[harveyp6]

I've got 6 x 15" SD1 wheels which 'as any fule know', won't fit a 4 cylinder P6.
Um, I didn't know, but I do now!

Isn't it just the top links on the rear suspension that need changing for V8 bent ones to allow these to fit?

Front hubs are different as well, and the difference in those with standard 5.5J wheels, added to the extra width of the Vitesse wheel might give clearance problems on the front too. Easily sorted though.

 

[stag76]

hi,id say these are gone by now???

do let us know.

many thanks jason