chris varming
Member
Gentlemen, my tacco is not working after I have fitted an electronic distributor. I have read the threads on Tachometers, but still have some questions.
1)What does RVI and RCV actually stand for?
2) I have a few tachometers all from P6. RVC 2412/00 (0->70 RPM) and RVI 2832/00A (0 ->60 RPM) which one will fit?
3) on the rear there are 2 grey connections, the upper one is for the bullet wire but the lower is not connected? what is the purpose for the lower?
4) will any of the 2 Tachometers fit directly into my P6 or do I have to buy a converting unit as shown in the thread?
Thanks regards, Chris Varming++
1)What does RVI and RCV actually stand for?
2) I have a few tachometers all from P6. RVC 2412/00 (0->70 RPM) and RVI 2832/00A (0 ->60 RPM) which one will fit?
3) on the rear there are 2 grey connections, the upper one is for the bullet wire but the lower is not connected? what is the purpose for the lower?
4) will any of the 2 Tachometers fit directly into my P6 or do I have to buy a converting unit as shown in the thread?
Thanks regards, Chris Varming++