Search results

- White with bronze flatpleat ambla - Car has been in Ireland for years, now back in the UK on original reg and new V5C in my name, on SORN - Running and driving superb, no issues mechanically, brakes excellent - Usual rust damage to tub, will require extensive and expensive restoration -...

Ex-Junkman V8 now in Resale Red: http://www.ebay.co.uk/itm/161847799873 I have no idea why this car attracts people who festoon it with daft steering wheels and gear knobs: I had to remove similar rubbish after I had bought it. Also, it's not a 3500S. It's an automatic that was...

Does anyone have a good kickdown cable kicking about, please? And maybe a leftover tailshaft housing gasket from the last rebuild kit? Cheers!

From one second to the next, my BW 65 doesn't shift into neutral or reverse. Drive still works, i.e. the car drives froward no matter which gear your select, except P, which actuates the parking pawl, but even then forward is still engaged.

From a late series 2 (Oct 1975), ca. 89,000 miles. Has been run with too high a pressure for a while, will not shift into gear at all. Gearbox is complete with torque converter, it's out of the car and ready for pick up in Stockport.

Available in Holland: http://www.bumperworld.eu/bumpers/rover/s/379

Hello all, I urgently need a right hand carburetter for the late V8, PLEASE. Should be an AUD 623R. It doesn't have to be a good one, because I have everything to properly rebuild it. Cheers!

Yep, you read right. After 5 years of standing around chain smoking for 45 minutes every time I switched it off, and the car often stalling in heavy traffic even on cold days, even I had enough. Hence some component buyage was done: This is the pump I'm going to use: So first, some...

Also a set of black glove boxes. The items are in good condition and located in Stockport. I'd prefer if you would take the entire lot in one go. Local pick up only, please. Cheers Christian

A friend of mine is having bother with the gearbox on his SD1. Previously it's been okay but occasionaly it would stick in first, then after 500 yards or so normal service would resume. Then, after taking it down the road it conked out on the way home. He found a fault with a wire to the coil...

Period correct for your P6. They look like new and can be used (I did for a few days), but clearly are more for show than go. Would look ace as spares on the bootlid without a cover when you go to shows. Free to collect from Stockport. Cheers Christian

What it says in the title. Cheers, Chris

After changing the radiator with a reconditioned one (this may, or may not be related), the gearbox didn't shift up properly. I.e., the 1/2 shift didn't work when cold, it would stay in 1. But manually shifting into 2 engaged 2nd and the 2-3 shift was OK. When warm, it shifted so, so, not like...

Is anyone on this forum going to pick up parts from a dismantled Mexico Brown 3500 in Manchester next Saturday? I'm talking about this car: If yes, please contact me. Cheers, Christian

Oh PLEASE, someone must have these parts lying about. For my Series II V8 I'm desperately seeking the front armrests in Mango. Also, I'm looking for a decent set of carpets for the footwells (the ones that go from the front footwell all teh way to the rear seat) in Mortlake Brown. These are...

From a series II. Apparently nothing wrong with it, but would benefit from a rattle can of semi gloss black. Preferably pick up from Stockport. But you can always arrange for a courier. Please, it's in the way. If nobody needs it, I'll pass it on to the family scrap metal merchant end of...

It bloody works: Car is for sale, too: http://www.carandclassic.co.uk/car/C291842#

Looking for a really good carpet set for a Series 2 V8 auto. Cheers, Christian

Looking for a set of Series 2 V8 armrests in either a light colour, or black. Ideally a full set, but will settle for front ones only if need be. Cheers, Christian

Looking for the following parts in Mango for a 1976 V8: - B-pillar trim (both sides) - C-pillar trim (both sides) - Front armrests (both sides) - Front door cards (Both sides) - Parcel shelf - Filler between parcel shelf and back window - Rear centre armrest Cheers, Chris

It is an established law of nature that people who want their Rover P6 interiors orange are punished for their lack of taste. The stuff is rarer than hen's shit. However, I heard it through the grapewine, that there are now at least two other rather eccentric individuals, who cherish being...

Hello all, I'm looking for the A/B/C pillar trim. Also looking for the parcel shelf vinyl cover and the trim at the bottom of the rear screen. The trim should all be Mango, or any other light colour, so I can change it to Mango.

Subject says ist all. I only need the cushion that actually folds down. Cheers!

Perfectly usable radiator, never led to overheating. Would respond well to a rattle tin of semi gloss black. Free to collect from my home in Stockport on one condition: Must be used in a Rover V8, not weighed in for the copper.