Nickthelomas
New Member
Righto, what if the band is to tight. The closest thing I could get to a torque wrence was making my 8mm spanner one ft long and hanging a 4.5lb weight off it, I left .5 of a lb off to accommodate the weight of my spanner contraption. I have cleaned filter and sump reassembled and oiled up, upon testing I get the perrrping noise in D 2 and L, which was probably what it was doing before but as it all of sudden got so much werse I parked up with out testing thoroughly, my bad. I also forgot to mention that just befor it got real bad I lost reverse briefly for about 2 minutes but going through each gear a couple of times got it back. So Harvey, gimme the bad news. The bands in my 35 are relatively new, will fit the 65? I am also assuming u will tell me I need to fully flush my system with new correct oil a couple of times and overhaul the servos, tomorrow I am going to pull the box out so hit me with the werst as it'll be out so I mite as well do it all.
My oil did smell burnt and the bottom of sump and magnet was grey with like chalk dust but obviously it was metal dust, like the inside of a drum brake.
My oil did smell burnt and the bottom of sump and magnet was grey with like chalk dust but obviously it was metal dust, like the inside of a drum brake.