senator30e
Member
Hi All!,
I have just made a batch of 3 pairs of P6 rear floor / side repair panels as close to the original specification as I could manage, complete with the mounting bracket used only during assembly at the factory.
These were not cheap to produce, the blanks were laser cut, the press tools had to be specially made etc., however they do give the original factory look to the bottom of the well area under the ends of the rear seat, a very common rot spot as we know.
The following pics will explain all.
They are made in 1.2mm steel and are £25 each if anyone is interested, and charging myself the same that still works out at a slight loss for me, but hopefully someone will benefit.
I have used one pair on my own base unit, and have 2 of each side left to sell - when they are gone, I will not be making any more!.
Sorry for posting them here and not in 'for sale' but I thought here might be more relevant.
I have just made a batch of 3 pairs of P6 rear floor / side repair panels as close to the original specification as I could manage, complete with the mounting bracket used only during assembly at the factory.
These were not cheap to produce, the blanks were laser cut, the press tools had to be specially made etc., however they do give the original factory look to the bottom of the well area under the ends of the rear seat, a very common rot spot as we know.
The following pics will explain all.
They are made in 1.2mm steel and are £25 each if anyone is interested, and charging myself the same that still works out at a slight loss for me, but hopefully someone will benefit.
I have used one pair on my own base unit, and have 2 of each side left to sell - when they are gone, I will not be making any more!.
Sorry for posting them here and not in 'for sale' but I thought here might be more relevant.