rover p6...1970  for bits.

J

jay

New Member
The only P6 free stuff......I only have wood effect panels in dark wood effect /door handles inside and out/window winders//front and rear light units (with glass)with good chrome//4 working clocks...dash clock's ,speedo,rev counter/dash top panel(I have 4 in black )I have no plastic alt brackets..If you want 1 use a metal mk2 or mk3 fiesta one with a cvh engine as they will fit and are very simalar in shape and size of the plastic one.also aford sierra/transit pinto engine bracket will also fit(be careful there are 2 diffrent types u need the flat type)
1X 2200 gearbox(its got a plate on top that say rebuilt by rover solihul and a serial number)2X2000 gearbox's series 2
21 as new steel rims(paint a bit chipped but unused and never fitted with tyres)
front screen triplex..rear screen sundym type also screen rubbers front and rear slight cracks but usable
front and rear bumpers bit rusty may may be ok for rechromeing(v8 bumpers)

I HAVE EDITED THIS POST(from 10 sept 2006)
Free to anyone who can collect or maybe able to deliver if local(25miles max)from Diss east anglia.(If you want to give me a drink fosters is nice :D )only PM me on this web site for what you want and I will get back to you if I still have the bits.PLEASE NO ONE CALL AT MY OWN HOUSE UNLESS YOU HAVE RUNG ME BEFORE..

Look at my script underneath to see where i am.
 
Hi Jay,
I need an airfilter housing for 2200 SC engine. And many more bits, but they are less important.
- weather strips
- radio (old, perhaps valve)
- set of tyres
- right hand side front and rear doors are badly dented

- A GOOD MECHANIC near Exeter!

Cheers,
Bandito.
 
Hello Jay,
I need the following if you still have them available.....A front valence if not rusty or badly beat up, an alternator adjusting bracket, TC bonnet badge, gearbox if synchromesh good in all forward gears, a better interior than the one I have, in any material.??!
Regards, Drew ???
 
Hi Jay.
I could do with the following if you've got it to spare.
Screen wash pump.
Rear Overriders (pair)
Rover bonnet badge (if in reasonable nick)
working (tick-tock) Clock
oil pressure light sender unit.

as you know i'm local, I can collect.
cheers
Paul S
 
I could do with the following if you've got it to spare.
Screen wash pump.
Rear Overriders (pair)
Rover bonnet badge (if in reasonable nick)
working (tick-tock) Clock
oil pressure light sender unit.
...........................................
Sorry no screen pump.or bumpers the only badge for a bonnet i have is cracked and has crazed inside.no clock as the one in my car dont work and i am looking for a good one myself.oil sender unit can be bought new for about £5-£8 No leather trim either
 
I think you can make the driver's door strip by cutting down a rear door strip ( these are more common and less likely to get broken
But it may be the other way round - ie a rear door strip out of a driver's door one
I'd need to go out and measure up
 
i have just found out another type of color of wood effect..
_A light wood grain effect.
-A dark grain wood effect.
-A red/brown grain wood effect.
-A black wood effect.(not sure if original but have found the color on 2 p6 rovers)
anyone else found other colors in p6 rovers?
 
I suppose if you can still get Formica (can you?) you could have whatever colour you want
Did Rover ever use real wood as standard on these ?
 
hi,
there are three types of wood effect. 1963 -1970 which was all series one cars had the same. series two cars 1970-1975 had the darker effect and finally 1975- 1977 had the light wood. the first 1000 cars off the productionline had real wood in them and not 'pretend'

ianp6man
 
You can buy "sticky back plastic" as they say on Blue Peter, from B&Q etc in various effects. You could have a proper boy racer carbon fibre effect... Or maybe not !

I bought some wood effect a few months back to cover some hi-fi speakers that I built from chip-board. It looks quite good.

Richard
 
sticky back plastic - is that Fablon ? I thought that and Formica were long extinct
Never seen it used on House Doctor etc !
 
I have just got a P6 FLM estate.
No engine or gearbox.
All I can let anyone have is glass..fabric sunroof..interior trim ..headlining..indicator lights..switchgear..bumpers(chrome is ok)..boot is ok but paint is flaking..
This is all I can let anyone have as the car is on a destruction order and i have to have the car destroyed by july 12th 2006.
I will edit this post when stuff goes.(1 july)
this has now gone ..
 
Can you not remove the rear estate section/tailgate? It seems to be easy to do according to previous posts & would certainly be worth doing as another estate could be made with a donor saloon. The existing car would still be destroyed but will not have died in vain. Do you have jobsworth (we breed them like no other nation, remember?) council wallah's looking over your shoulder when it's crushed? Even if that's the case, I can't see how they could object to a relatively small part of the car being removed. No surprises if they did though as small-minded bureaucracy is alive & well in this country.
Worth a shot though, I would have thought.
 
jay - have pm'd you - will be in East Anglia for a few days this week. Interested in the interir seats and the rear side galss of the estate if stiull there. Will not have pc access after Tuesday
 
You must log in or register to reply here.
Back
Top