1. sdibbers

    Ballast resistor value

    Hi All, I've been running a Accuspark ignition module in my car for about 6 months. Unfortunately yesterday evening on the way home it started breaking down at higher speeds on the Parkway. Missing at higher loads and higher revs such as overtaking. I'm considering reverting to points again...
  2. MickEssex

    Not starting

    I apologise for the long post but thought it necessary to tell the whole story. I have a bit of a dilemma. A few weeks ago I tried to start the car, it wouldn't (I have had no issues previously), I did all the usual checks but had no spark at the points, I couldn't find my multimeter at the...
  3. M

    Removed aftermarket air con, Think I broke something

    Hello all, First time posting so be gentle. I've had my 75 3500 for about 12 months now and have started to remove the aftermarket air con out of an old Holden from it. The only problem is, now she won't start. It still turns over, but won't fire. Most of the yanking and pulling came from the...
  4. craig r

    New HT leads for 2200TC. Recommendations?

    Hi everyone, as the title suggest, im looking for recommendations for new HT leads for my 2200TC. I noticed the inside part of the king lead which connects to the distributor cap is very worn (looks like a little burned out wire??) so Im going to put a full new set on. Can see Mark Gray has a...