Search results

hi all im sadly putting my p6 up for sale as not hardly used as being a 2nd classic-Im always using my p4 if anyone is interested its on ebay at mo item number--281852480301 or message me on here for more pics or info regards paul

after jacking the passenger rear side up on my p6 to do some work on my exhaust ive noticed a puddle of oil (red) on the floor has anyone any idea where this would come from as I thought it was a sealed unit??? any help please cheers paul

my exhaust on my v8 p6 sometimes knocks slighty when I go over a bump. is there anything that I can fit to prevent this> perhaps rubber piece or would this cause heat issues ??? regards paul

anybody going to the rover meet next sunday at quantium ?

hi ive fitted a stainless to my series 1 v8 sounds nice but looking for a little bit more burble . looked underneath do you need both silencers? or could I even cut 1 away and replace with a piece of pipe. would it still run ok or create issues? anybody feedback woul;d be great regards paul

I have a pair of screens to fit a p6 toughned glass just need cleanup both free to good home if collected regards paul

hi all im having a bit of a clearout from my shed/garage ive got a few p6 bits v8 carbs---£35.00 pair of v8 manifolds---£10-sold spare wheel carrier which fits on the boot (no prop or badge)--£40 sold v8 wheel trims--£10 v8 front pulley--£20 series 1 front grille--£40 pair of front fog.spot...

hi im looking for a advance vacuum part that fits on the side of the distributer as mines packed up.(diaphrams seized). don't mind if its secondhand as long as its fully functional. can anyone help please regards paul

on my series 1 v8 p6 I have the following(Stromberg carbs). im looking for a diaphrahm set for them does anyone know of a supplier I have attached some pics for reference cheers paul

hi on my series 1 v8 on my brake servo there is a whitish plastic cap which I believe goes over the filter . This has a hole init which lets air in and whistles. I have attached a pic for reference. does anyone have a good spare one ? on mine the previuos owner has put some sort of silicone onit...

hi im selling a lucas number plate light that fits into the rear bumper chrome/lense/gasket and bulb. no longer needed £50 ono pm me if you need pics or any info cheers paul

hi im selling a boot mount kit for the spare wheel. all there apart from boot prop and badge that fits in the top once spares moved. £75 ono. pm me if you need anymore info or pics cheers paul

hi all im thinking of selling my rover p6 series 1 v8. tobacco leaf new gearbox new interior. new stainless exhaust electric fuel pump original radio registered 1969 im the 4th owner 97300 miles mot till dec 29th 2015 passed last time with no advisories few bits of paperwork showing works...

sent my p6 into the local garage last week for routine maintenance and they stored it outside in there yard. they locked the car up including the boot but I cant get the boot open now with the key. anybody else had this problem. is there a easy solution to open it up??? any help please regards paul

ive got a p6 v8 and I have fitted a stainless exhaust . im no boy racer but im looking to improve the exhaust note a touch so you can hear that v8 burble on tickover. spoke to a chap recently at a show who suggested a cherry bomb pipe but not sure if that would over do it. is it possible to cut...

hi all im looking to fit a uprated rad to my 1969 p6 v8 auto. to help with my temp issues tried all other options now this has been recommended to me. need one asap as car in repair shop. I am going to the resto show at the nec on sunday does anyone know of a company there selling them. any help...

ive just bought a facet fuel pump to fit to my v8 p6. can anyone advize me on installation please. ie what happens to old pump ? im fitting it in the front behind the washer bottle were is it best to take feeds from ? and were do I cut into fuelpipes to reroute fuel? cheers paul

ive got a 1969 p6 v8 series 1. what is the correct engine temp. when I go out for a drive it goes upto just on edge of red (120) then it drops down a bit. is this normal or should I investigate more ie coolant system flush or even fit a bigger rad ? anybody else had this issue? cheers paul

hi im selling this front grille to fit the series 1 . not sure if its 3500 or 2000/2200? can anyone help cheers paul

hi all I bought a load of chrome items to fit on my p6 v8 once it was fully painted but circumstances have chanced and no longer needed so up for sale. all been stored carefully in my spare bedroom so not knocked about in the garage. rechromed front and rear bumpers. nos pair front lights...

im having trouble locking my drivers door as its stiff and bending the key. does anyone have any spare ones ? are they easy to change cheers paul

ive got a 1969 series 1 v8 and have a problem with my gearbox it goes into reverse but has no forward gears just a slight wearing noise. a mechanic friend of mine had a listen to it and assured me it could be the drive bands are worn. I take it this is a full rebuild. if I go down this route can...

hi all I bet this has come up on the forum many a time but can anyone tell me the correct way to check your gearbox fluid level ? I keep getting told different ways cheers paul

im looking at fitting a power steering to my p4 and im lead to believe you have to change the dynamo to a alternater to take extra current used. any percific ways to do this has anyone done this any feedback would be great regards paul

can anyone help the lead that runs along the p6 floor from the battery comes to a point just under drivers feet normally a insulated bolt. whats this actually called and where would I purchase one as mines gone rusty and need to undue it to add some wires for my after market amp meter. regards paul